TCZ-200CX2AK permanent magnet safety door anti-collision device TCZ-200CX2AK permanent magnet safety door protection device is a type of safety door lock for the boarding gate of the crane end beam. It uses the principle of magnetic induction to limit the movement limit position of mechanical equipment through electrical switches. The principle of magnetic induction is used to activate internal switches, achieve the purpose of making and breaking contacts, and control external circuits. It overcomes the characteristics of poor contact and easy damage of mechanical collision switches. The permanent magnet safety door protection device is a new product for crane permanent magnet anti-collision safety door device, which is aimed at addressing the safety hazards of the end beam boarding door in on-site use. It can replace the door bolts and safety switches on the end beam boarding door, and has long service life, strong seismic resistance, simple installation, no need to change the electrical control system, and prevention of safety hazards. This product is equipped with a strong magnetic device inside. When the end beam boarding door is close to this product, the strong magnetic device tightly adheres to the boarding door device and outputs a signal to the electrical control system, playing a synchronous role in locking the door and signal output, making it easier for staff to operate and pass through the end beam boarding door. The permanent magnet anti-collision safety door device TCZ-200CX2AK adopts a magnetic induction method and passive detection, without the need for external power supply. Only the red and blue leads can be connected to the translation control circuit. In order to ensure the normal operation of the internal status indicator light of this device, please choose to use it in the correct circuit. This device does not require external power supply, only the red and blue leads can be connected to the translation control circuit. In order to ensure the normal operation of the internal status indicator light of this device, please choose to use it in the correct circuit. Permanent magnet collision safety door device INCHI-COM/D1A Permanent magnet collision safety door device INCHI-CMS/D1A Permanent magnet collision safety door device INCHI-CMS/D2A Permanent magnet collision safety door device INCHI-CMS/D1B Permanent magnet collision safety door device INCHI-CMS/D2B Permanent magnet collision safety door device YQWJ-CMS/D1A Permanent magnet collision safety door device YQWJ-CMS/D1B Permanent magnet collision safety door device YQWJ-CMS/D2A Technical parameters: 1. Rated current: 15A2, ambient temperature: -20 ℃ -+65 ℃ 3. Relative humidity:< 95% (+25 ℃) 4. Suitable for environments with severe dust, including conductive powder 5. Suitable for places with moderate or below vibration or impact 6. Housing protection level: IP677, rated circuit voltage: 110-380V. This product is a technically advanced proximity switch with stability, reliability, and reliability. The working principle is to generate a magnetic field around the sensor through changes in the position and polarity of the trigger, causing the sensor contacts to act. Internally installed strong magnetic device, when the end beam boarding door is close to this product, the strong magnetic device tightly adheres the boarding door to the device and outputs a signal to the electrical control system, playing a synchronous role in locking the door and signal output, making it easier for staff to operate and pass through the end beam boarding door. Usage: Fix the safety door device onto the angle steel with M8 screws, and customize the following contact forms according to the required wiring types:; Normally open: The switch is usually in the open state, but when the magnet acts, the switch is in the closed state. Normally closed: The switch is usually in the closed state, but when the magnet is applied, the switch is in the open state. Open close type: refers to a switch divided into two groups with three wires, one of which is a common wire. If one group is normally open, then the other group is normally closed. When the magnet acts, the normally open type is in the closed state, and the normally closed type is in the open state. Temperature type: Suitable for ambient temperatures ranging from -20 ℃ to+180 ℃. TCZ-200CX2AK permanent magnet safety door anti-collision device