Working principle of CELAP-106C two-stage deviation switch: The working process of this switch is that when the conveyor belt deviates, the belt touches the switch vertical roller. When the vertical roller deviates to the first level action angle, the first level switch acts and outputs a signal alarm. If the tape continues to deviate and the vertical roller of the switch reaches the level II action angle, the level II switch will send a stop signal. If connected to the control circuit, automatic shutdown can be achieved. Technical indicators 1. Rated voltage: AC380V2. Rated current: 5A3 Number of contacts: Two independent normally open and normally closed contacts. 4. Housing protection level: DT type dustproof housing, protection level IP67. 5. Surrounding environment temperature: -25~80 ℃. 6. The switch can operate under vibration conditions with a frequency of 10-60Hz and an amplitude of 0.75mm (10g). 7. External dimensions: Housing L x W x H (mm) 190 x 135 x 100. 8. Operating force: 5-7 kg. 9. Communication interface: RS485 address coding network communication (effective for models with suffix BM) installation and adjustment.
1. The deviation switch is set on both sides of the conveyor belt, and the vertical roller should be perpendicular to the edge plane of the conveyor belt, and the two sides of the conveyor belt should be located at 1/3 of the height of the vertical roller< br style="box-sizing: border-box; line-height: 2; word-wrap: break-word; white-space: pre-wrap !important; max-width: 920px !important; "2. The distance between the vertical roller of the deviation switch and the normal position of the conveyor belt should be 50-100mm.